# Simple script for mining maintenance (in Korean)

**URL:** <https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52>\
**Category:** Mining\
**Created:** [October 9, 2020, 8:44am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52 "2020-10-09T08:44:42Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![sword](https://avatars.discourse-cdn.com/v4/letter/s/bbe5ce/32.png) [@sword](https://community.creditcoin.org/u/sword)\
**Post date:** [October 9, 2020, 8:44am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/1 "2020-10-09T08:44:42Z")

</div>

1. Copy&paste following context.
2. Name it as you wish. (e.g. cccommand.sh)
3. Place it under CreditcoinDocs-Mainnet-master directory
4. chmod 755 cccommand.sh
5. ./cccommand.sh

##################################################################################

#!/bin/bash

# creditcoin command selection

until [“$opt” = “0”]  
do  
echo “==================================================”  
echo “1. 서버 및 클라이언트 실행”  
echo “2. docker container 상태 확인”  
echo “3. 내 서버원장의 블록높이 확인”  
echo “4. 내가 캔 블록확인 (종료시 Ctrl+C)”  
echo “5. validator 디버그 메시지 확인 (종료시 Ctrl+C)”  
echo “6. peer 확인 (종료시 Ctrl+C)”  
echo “7. sawtooth 설정확인”  
echo “8. 서버 및 클라이언트 종료”  
echo “0. 스크립트 종료”  
echo “--------------------------------------------------”  
printf "원하는 기능의 번호를 선택 후 엔터를 입력하세요 : "

```
read opt

echo "=================================================="

case $opt in 
	1)
		echo "서버 및 클라이언트 도커 컨테이너를 실행합니다..."
		docker-compose -f ./Server/creditcoin-with-gateway.yaml up -d
		sleep 1
		docker-compose -f ./Client/creditcoin-client.yaml up -d
		sleep 1
		;;
	2)
		echo "docker container 상태는 아래와 같습니다..."
		docker container ls 
		;;
	3)
		echo "현재 서버 원장의 블록높이는 아래와 같습니다..."
		docker exec -it creditcoin-client ./ccclient tip
		;;
	4)
		echo "현재까지 채굴한 블록번호와 공개키는 아래와 같습니다..."
		pub=$(docker exec -it sawtooth-validator-default sh -c "cat /etc/sawtooth/keys/validator.pub")
		docker exec -it sawtooth-validator-default bash -c "sawtooth block list --url http://rest-api:8008 -F csv" | grep $pub | awk -F, 'BEGIN{printf("BLKNUM	SIGNER\n")} {printf("%s\t%s\n", $1, $5)}'
		;;
	5)
		docker exec sawtooth-validator-default tail -f /var/log/sawtooth/validator-debug.log
		;;
	6) 
		while true
		do
			timestamp() {
			  ts=`date +"%Y-%m-%d %H:%M:%S"`
			  echo -n $ts
			}
			REST_API_ENDPOINT=localhost:8008
			peers=`curl http://$REST_API_ENDPOINT/peers 2>/dev/null | grep tcp:// | cut -d \" -f2 | sed 's/^.*\///'`
			# For dynamic peering, need to log nc probe results to view history of connected peers over time.
			for p in $peers; do
			  ipv4_address=`echo $p | cut -d: -f1`
			  port=`echo $p | cut -d: -f2`
			  timestamp
			  preamble=" Peer $ipv4_address:$port is"
			  if nc -z $ipv4_address $port
			  then
			    echo "$preamble open"
			  else
			    echo "$preamble closed"
			  fi
			done
		sleep 60
		done | tee -a peercheck.result
		;;
	7) 
		echo "sawtooth 설정은 아래와 같습니다..."
		docker exec -it sawtooth-validator-default sawtooth settings list --url http://rest-api:8008
		;;
	8)
		echo "서버 및 클라이언트 도커 컨테이너를 종료합니다..."
		docker-compose -f ./Client/creditcoin-client.yaml down 			
		sleep 1
		docker-compose -f ./Server/creditcoin-with-gateway.yaml down
		sleep 1
		;;
	0)
		break
		;;
	*)
		echo "실행할 수 없는 옵션입니다"
		;;
esac
echo ""

```

done

##################################################################################

---

<div class="post-metadata">

**Author:** ![taelimoh](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.creditcoin.org/taelimoh/32/3_2.png) [@taelimoh](https://community.creditcoin.org/u/taelimoh)\
**Post date:** [October 10, 2020, 8:50am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/2 "2020-10-10T08:50:54Z")

</div>

Welcome to the community @sword! It’s very encouraging to see the community has a desire to contribute to our ecosystem.

---

<div class="post-metadata">

**Author:** ![sword](https://avatars.discourse-cdn.com/v4/letter/s/bbe5ce/32.png) [@sword](https://community.creditcoin.org/u/sword)\
**Post date:** [October 12, 2020, 2:45am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/3 "2020-10-12T02:45:59Z")

</div>

```
#!/bin/bash
# creditcoin command selection

until ["$opt" = "0"] 
do
	CurBlkNum=0
	PreBlkNum=0

	echo "=================================================="
	echo "1. 서버 및 클라이언트 실행" 
	echo "2. docker container 상태 확인"
	echo "3. 내 서버원장의 블록높이 확인" 
	echo "4. 블록높이 감시 (1시간 동일 시 재기동)"
	echo "5. 내가 캔 블록확인 (종료시 Ctrl+C)" 
	echo "6. validator 디버그 메시지 확인 (종료시 Ctrl+C)"
	echo "7. peer 확인 (종료시 Ctrl+C)"
	echo "8. 서버 및 클라이언트 종료" 
	echo "0. 스크립트 종료"
	echo "--------------------------------------------------"
	printf "원하는 기능의 번호를 선택 후 엔터를 입력하세요 : "

	read opt

	echo "=================================================="

	case $opt in 
		1)
			echo "서버 및 클라이언트 도커 컨테이너를 실행합니다..."
			docker-compose -f ./Server/creditcoin-with-gateway.yaml up -d
			sleep 1
			docker-compose -f ./Client/creditcoin-client.yaml up -d
			sleep 1
			;;
		2)
			echo "docker container 상태는 아래와 같습니다..."
			docker container ls 
			;;
		3)
			echo "현재 서버 원장의 블록높이는 아래와 같습니다..."
			docker exec -it creditcoin-client ./ccclient tip
			;;
		4)
			while true
			do
				CurBlkNum=$(docker exec -it creditcoin-client ./ccclient tip | awk '/^[0-9]/{print int($0)}')

				if ["$PreBlkNum" -eq 0]
				then 
					echo "$(date "+%Y-%m-%d %H:%M:%S") | 현재 블록높이는 $CurBlkNum입니다."
				elif ["$PreBlkNum" -eq "$CurBlkNum"]
				then
					echo "$(date "+%Y-%m-%d %H:%M:%S") | 현재 블록높이가 1시간 전과 같아 서버를 재기동합니다..."
					docker-compose -f ./Client/creditcoin-client.yaml down 			
					sleep 1
					docker-compose -f ./Server/creditcoin-with-gateway.yaml down
					sleep 1
					docker-compose -f ./Server/creditcoin-with-gateway.yaml up -d
					sleep 1
					docker-compose -f ./Client/creditcoin-client.yaml up -d
					sleep 1
				else 
					echo "$(date "+%Y-%m-%d %H:%M:%S") | 1시간 전 블록높이는 $PreBlkNum이고 현재 블록높이는 $CurBlkNum입니다."
				fi

				PreBlkNum=$CurBlkNum
				sleep 3600
			done
			;;
		5)
			echo "현재까지 채굴한 블록번호와 공개키는 아래와 같습니다..."
			pub=$(docker exec -it sawtooth-validator-default sh -c "cat /etc/sawtooth/keys/validator.pub")
			docker exec -it sawtooth-validator-default bash -c "sawtooth block list --url http://rest-api:8008 -F csv" | grep $pub | awk -F, 'BEGIN{printf("BLKNUM	SIGNER\n")} {printf("%s\t%s\n", $1, $5)}'
			;;
		6)
			docker exec sawtooth-validator-default tail -f /var/log/sawtooth/validator-debug.log
			;;
		7) 
			while true
			do
				timestamp() {
				  ts=`date +"%Y-%m-%d %H:%M:%S"`
				  echo -n $ts
				}
				REST_API_ENDPOINT=localhost:8008
				peers=`curl http://$REST_API_ENDPOINT/peers 2>/dev/null | grep tcp:// | cut -d \" -f2 | sed 's/^.*\///'`
				# For dynamic peering, need to log nc probe results to view history of connected peers over time.
				for p in $peers; do
				  ipv4_address=`echo $p | cut -d: -f1`
				  port=`echo $p | cut -d: -f2`
				  timestamp
				  preamble=" Peer $ipv4_address:$port is"
				  if nc -z $ipv4_address $port
				  then
				    echo "$preamble open"
				  else
				    echo "$preamble closed"
				  fi
				done
			sleep 60
			done | tee -a ctcpeer.result
			;;
		8)
			echo "서버 및 클라이언트 도커 컨테이너를 종료합니다..."
			docker-compose -f ./Client/creditcoin-client.yaml down 			
			sleep 1
			docker-compose -f ./Server/creditcoin-with-gateway.yaml down
			sleep 1
			;;
		0)
			break
			;;
		*)
			echo "실행할 수 없는 옵션입니다"
			;;
	esac
	echo ""
done
```

---

<div class="post-metadata">

**Author:** ![wind](https://avatars.discourse-cdn.com/v4/letter/w/97f17d/32.png) [@wind](https://community.creditcoin.org/u/wind)\
**Post date:** [October 12, 2020, 5:13am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/4 "2020-10-12T05:13:59Z")

</div>

So much thankful for all your support, sword!

---

<div class="post-metadata">

**Author:** ![will\_gluwa](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.creditcoin.org/will_gluwa/32/9_2.png) [@will\_gluwa](https://community.creditcoin.org/u/will_gluwa)\
**Post date:** [July 16, 2021, 2:40am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/5 "2021-07-16T02:40:44Z")

</div>

@sword Is there any way you could add English comments to these scripts and maybe put them onto Github (Or give me permission to do so on your behalf 🙂 )

---

<div class="post-metadata">

**Author:** ![sword](https://avatars.discourse-cdn.com/v4/letter/s/bbe5ce/32.png) [@sword](https://community.creditcoin.org/u/sword)\
**Post date:** [July 16, 2021, 3:49am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/6 "2021-07-16T03:49:25Z")

</div>

Yes. My pleasure and honour.  
I made some updates of script,and translated Korean to English.  
So please review and debug it.

```auto
#!/bin/bash
# creditcoin command selection

until ["$opt" = "0"] 
do
	CurBlkNum=0
	PreBlkNum=0
	CurPeerNum=0
	CurSrvBlkNum=0

	echo "========================================================================="
	echo "1. Start Sever&Client containers" 
	echo "2. Check docker containers' status"
	echo "3. Monitor block height every 10 minute (press Ctrl+C to quit)" 
	echo "4. Monitor the block height (Restart if same height with an hour ago)"
	echo "5. Check mining history on my server's perspective (press Ctrl+C to quit)" 
	echo "6. Print validator's debug messages (press Ctrl+C to quit)"
	echo "7. Monitor my server's peer status (press Ctrl+C to quit)"
	echo "8. Terminate Server&Client container" 
	echo "9. Print Private Key/Public Key/Sighash"
	echo "0. Quit this script"
	echo "-------------------------------------------------------------------------"
	printf "Enter the number and press Enter : "

	read opt

	echo "========================================================================="

	case $opt in 
		1)
			echo "Starting Server&Client docker containers..."
			docker-compose -f ./Server/creditcoin-with-gateway.yaml up -d
			sleep 1
			docker-compose -f ./Client/creditcoin-client.yaml up -d
			sleep 1
			;;
		2)
			echo "docker container's status are as following..."
			docker container ls 
			;;
		3)
			echo "Monitoring Block height every 10 minute..."
			while true 
                        do
                                CurBlkNum=$(docker exec -it creditcoin-client ./ccclient tip | awk '/^[0-9]/{print int($0)}')
                                CurPeerNum=$(curl http://localhost:8008/peers 2>/dev/null | grep tcp | wc -l)
                                CurSrvBlkNum=$(curl https://api.creditcoinexplorer.com/api/blockchain 2>/dev/null | grep 'blockHeight' | awk -F[:,] '{gsub("\"", ""); print $2}')
                                echo "$(date "+%Y-%m-%d %H:%M:%S") | [Server] $CurBlkNum [Network] $CurSrvBlkNum [Peer] $CurPeerNum"
                                sleep 600
                        done
                        ;;

		4)
			while true
			do
				CurBlkNum=$(docker exec -it creditcoin-client ./ccclient tip | awk '/^[0-9]/{print int($0)}')

				if ["$PreBlkNum" -eq 0]
				then 
					echo "$(date "+%Y-%m-%d %H:%M:%S") | The Block height is $CurBlkNum."
				elif ["$PreBlkNum" -eq "$CurBlkNum"]
				then
					echo "$(date "+%Y-%m-%d %H:%M:%S") | Restarting Server&Client containers as current block height is same with that of one hour ago..."
					docker-compose -f ./Client/creditcoin-client.yaml down 			
					sleep 1
					docker-compose -f ./Server/creditcoin-with-gateway.yaml down
					sleep 1
					docker-compose -f ./Server/creditcoin-with-gateway.yaml up -d
					sleep 1
					docker-compose -f ./Client/creditcoin-client.yaml up -d
					sleep 1
				else 
					echo "$(date "+%Y-%m-%d %H:%M:%S") | The block height of one hour ago is $PreBlkNum, now is $CurBlkNum."
				fi

				PreBlkNum=$CurBlkNum
				sleep 3600
			done
			;;
		5)
			echo "Mining history of this server's perspective is as following..."
			echo "Please note that mining history of ledger's perspective would be different with this."
			pub=$(docker exec -it sawtooth-validator-default sh -c "cat /etc/sawtooth/keys/validator.pub")
			docker exec -it sawtooth-validator-default bash -c "sawtooth block list --url http://rest-api:8008 -F csv" | grep $pub | awk -F, 'BEGIN{printf("BLKNUM	SIGNER\n")} {printf("%s\t%s\n", $1, $5)}'
			;;
		6)
            echo "If no debug message printed, please check 'sawtooth-validator -vv' in 'Server/docker-compose.yaml', instead of 'sawtooth-validator'."
            valog=$(docker inspect --format='{{.LogPath}}' sawtooth-validator-default)
            sudo tail -f ${valog}
            ;;

		7) 
			echo "Checking peers list&status every 1 minute..."
			while true
			do
				timestamp() {
				  ts=`date +"%Y-%m-%d %H:%M:%S"`
				  echo -n $ts
				}
				REST_API_ENDPOINT=localhost:8008
				peers=`curl http://$REST_API_ENDPOINT/peers 2>/dev/null | grep tcp:// | cut -d \" -f2 | sed 's/^.*\///'`
				# For dynamic peering, need to log nc probe results to view history of connected peers over time.
				for p in $peers; do
				  ipv4_address=`echo $p | cut -d: -f1`
				  port=`echo $p | cut -d: -f2`
				  timestamp
				  preamble=" Peer $ipv4_address:$port is"
				  if nc -z $ipv4_address $port
				  then
				    echo "$preamble open"
				  else
				    echo "$preamble closed"
				  fi
				done
			sleep 60
			done | tee -a ctcpeer.result
			;;
		8)
			echo "Terminating Server&Client docker containers..."
			docker-compose -f ./Client/creditcoin-client.yaml down 			
			sleep 1
			docker-compose -f ./Server/creditcoin-with-gateway.yaml down
			sleep 1
			;;
		9)
            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" 
            echo "!YOU NEED TO TAKE EXTREME CAUTION TO SHARE THESE KEY WITH OTHERS, !"
            echo "!BECAUSE YOUR ASSETS WILL BE STOLEN, ONCE YOUR PRIVATE KEY LEAKED.!"
            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" 
	    echo "### Private Key ###"
            docker exec sawtooth-validator-default cat /etc/sawtooth/keys/validator.priv | grep "[0-9]"
            echo "### Public Key ###"
            docker exec sawtooth-validator-default cat /etc/sawtooth/keys/validator.pub | grep "[0-9]"
            echo "### SigHash ###"
            docker exec creditcoin-client ./ccclient sighash | grep "[0-9]"
            ;;

		0)
			break
			;;
		*)
			echo "Not Available option."
			;;
	esac
	echo ""
done

```

---

<div class="post-metadata">

**Author:** ![will\_gluwa](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.creditcoin.org/will_gluwa/32/9_2.png) [@will\_gluwa](https://community.creditcoin.org/u/will_gluwa)\
**Post date:** [July 16, 2021, 6:12am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/7 "2021-07-16T06:12:37Z")

</div>

> [@sword](#):
>
> - Place it under CreditcoinDocs-Mainnet-master directory
> - chmod 755 cccommand.sh
> - ./cccommand.sh

Thanks @sword!

I made a few tweaks and committed it to my `Creditcoin-Tools` repo here:  
[https://github.com/MrAusnadian/Creditcoin-Tools/tree/main/ccCommand](https://github.com/MrAusnadian/Creditcoin-Tools/tree/main/ccCommand)

---

<div class="post-metadata">

**Author:** ![uncle](https://avatars.discourse-cdn.com/v4/letter/u/e5b9ba/32.png) [@uncle](https://community.creditcoin.org/u/uncle)\
**Post date:** [July 18, 2021, 2:19am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/8 "2021-07-18T02:19:55Z")

</div>

I really appreciate your help!!! @sword  
Leave a comment for beginners like me.  
If you can’t run it, go to [git-scm.com](http://git-scm.com) and install the program.  
Open a folder explorer and the directory where you want to run the bash shell  
Right-click on (folder with cccommand.sh file)  
Click “Git Bash Here”.  
Then type chmod +x ccCommand.sh and press Enter  
Then, type sudo ./ccCommand.sh or ccCommand.sh to run it.  
I don’t know if it will help others. Anyway thanks!!

---

<div class="post-metadata">

**Author:** ![noahglobal](https://avatars.discourse-cdn.com/v4/letter/n/e19adc/32.png) [@noahglobal](https://community.creditcoin.org/u/noahglobal)\
**Post date:** [November 22, 2021, 12:10pm UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/9 "2021-11-22T12:10:55Z")

</div>

how can I extract this file?  
Please help me.  
I am using ‘Docker’ and ‘Winodws Powershell’.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/creditcoin/original/1X/254a9c27e4f3884ebf122953d8d7b1945dae5661.png)

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/creditcoin/original/1X/e1cbb4f86865b5f166a1427a03314a74406102f3.png)

---

<div class="post-metadata">

**Author:** ![YJH](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.creditcoin.org/yjh/32/206_2.png) [@YJH](https://community.creditcoin.org/u/YJH)\
**Post date:** [November 24, 2021, 6:39am UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/10 "2021-11-24T06:39:50Z")

</div>

> [@Windows10 환경 간단한 채굴 Tools.bat](http://community.creditcoin.org/t/windows10-tools-bat/65):
>
> Windows 10 환경에서 사용할 수 있는 간단한 Tools를 만들어 보았습니다. Windows 배치 파일로 사용하시면 됩니다. \*경로는 [https://github.com/gluwa/CreditcoinDockerCompose-Mainnet](https://github.com/gluwa/CreditcoinDockerCompose-Mainnet) 파일 기준으로 C:\CreditcoinDockerCompose-Mainnet-dev\ 입니다. 기능 \*Client, Server 종료 \*Client, Server 실행 \*현재 블록확인 \*Peer 확인 \*블록감시 (1시간 단위, 블록이 같다면 서버와 클라이언트를 재실행합니다.) \*sighash, pub키, priv(마이너)키 조회 \*종료 사용 방법 메모장을 실행한다. 아래 코드를 [복사] 후 메모장에 [붙혀놓기]. [파일]-[다른 이름으로 저장] (1). [인코딩]-ANSI (2) [파일형식]-모든 파일(.) 변경 (3) 파일명 Tools.bat - [저장] @echo off :\_loop echo. e…

😃

---

<div class="post-metadata">

**Author:** ![noahglobal](https://avatars.discourse-cdn.com/v4/letter/n/e19adc/32.png) [@noahglobal](https://community.creditcoin.org/u/noahglobal)\
**Post date:** [November 24, 2021, 12:58pm UTC](https://community.creditcoin.org/t/simple-script-for-mining-maintenance-in-korean/52/11 "2021-11-24T12:58:09Z")

</div>

Thank you very much for your help!!!  
정말 감사합니다.  
덕분에 한시름 덜었습니다.ㅎㅎ